Mixer & Blender

The Automatic Vacuum Emulsify Mixer (SY-HME) has one blades-mixer for high viscosity material mixing and one high speed homogenizer for emulsification. The blades-mixer has scrappers to scrape the material stuck on the inner surface of mixing bowl to prevent dead corner from happening. The blades-mixer produces downward current to mix and push material going through homogenizer continuously.

The homogenizer head of the Automatic Vacuum Emulsify Mixer consists of high speed rotor and stator. There is pressure difference produced by the high spinning of rotor and stator, inside the homo-head from bottom to top. Shearing, breaking, mixing and emulsifying are happening during the material going through homo-head. The emulsified material is gushing out from the top of the homo-head and coming back to the homo-head again by the down force of blades-mixer when the upward force fading away.

Based on the aforementioned description, The Automatic Vacuum Emulsify Mixer(SY-HME) is widely applicable from high to low viscosity material.

Vacuum dispersion mixer is an improved design which can meet requirements of more diversified, complicated and pro?fessional food, cosmetic or pharmaceutical formulas / processes. This mixer may remedy the deficiency resulting from the reduction of use of emulsion. Meanwhile the feeding and stability of the products will be greatly enhanced. The different type of blades can be choosing for manufacturing purposes.

The Nauta-Mixer for the biological chemical (SY-NM) is using the 3D convection movement principle to mix the material inside the tank. And because the blander forces the material inside the tank to move up and down, so the mixing percentage would be increased and time could be reduced. With the simple and special designing of machine, the mixer could be clean easily.

The main blades at the bottom of mixing bowl create high-speed shearing force to provide cutting and separating product function. Because the flat surface design on bottom of mixing bowl, when the ingredients are going through the center blades that create the hemispherical flowing with high-speed variable mixing speed(100-1800RPM). This mixer can make unified granule in 1~3min. Dry powder, wet powder, or oil, solvent, paste, color spice can be adding into this mixer during the mixing process.

The Triplicity-cone Mixer (SY-RBT) is designing of three-body mixing chambers, one cone at top, one cone at bottom and one cone at center of body. Because three-body mixing chambers create the S-shape tank to increase the mixing quality and production. The material inside the SY-RBT is moving in three dimensional motions to allow the material mixing evenly without material sticky in the inner wall. And because the chamber is rotated at lower speed, so the material inside the chamber would not be damage and effect by high temperature.

• This machine is improvement mechanism of traditional duplicity-cone mixer. The body of mixing chamber has three parts, one cone at the top, one cone at the bottom and one cone at the center of body. With those three parts, the machine has forming on S-shape mixed tank in order to improve mixing result. Turbulence board, turbulence ball, mixing blade, high-speed dispersing device, crushing blade, pressurize liquid-spraying device, vacuum drying device, vacuum filter, and CIP cleaning device, can be install inside the mixing chamber.
• Standard operation is feeding raw materials from the top of the cone and discharge from the bottom, but by using batch rotation function, vacuum covering function or through the center of the cone, the bottom can be also used for feeding material automatically. This type of mixer is very suitable for mixing low specific gravity and high fluidity type crushing power or dyeing with small grains. The materials in the S-type tank are moving in three-dimensional motions to achieve well mixed.
• The standard mixed quantity is 40%~60% of total capacity.
The purpose of Triplicity-Cone mixer is to mix raw materials evenly. In order to prevent materials adhering on the wall of inner tank, the tank surface has been polish and finish with 15 RA value. This mixer can connect to vacuum and operate at low temperature to achieve drying purpose. Because this mixer can rotate at low speed, so it will not damage products, and the quality of products will not change when the temperature is at high condition. The products will have high finish quality, and it's indispensable equipment for chemical industry.

This mixer has U-type shape chamber with sequence screw type mixing blade inside the chamber. Both chamber and blade are meet sanitary grade and GMP standard. Inside the chamber, because screw type blade creates double anti-flow, so it increases the material contact surface which makes the mixing fast and evenly. The bottom discharge part can connect to screw type discharge device for packing purpose. This machine is useful for medium and large volume production. Vacuuming, heating, drying and cooling functions are available in this mixer too.

Due to the Multiblend machine has function of multi-direction action, there are no centrifugal force, specific gravity segregative, delaminateed and gathered situation. There are more mix site so the mix efficiency is good. The material mixed degree is better than general mixer; trough has polish treatment of GMP standard, Inner trough have no dead space, discharge smoothly, no remained material in trough and easy to clean it; Material mix in seal container, so it will not pollute the working environment or mixed material. If it need to mix micro quantity or more precise mix. it can equip baffle that can shorten the mix time.

This mixer has U-type shape chamber with sequence screw type mixing blade inside the chamber. Both chamber and blade are meet sanitary grade and GMP standard. Inside the chamber, because screw type blade creates double anti-flow, so it increases the material contact surface which makes the mixing fast and evenly. The bottom discharge part can connect to screw type discharge device for packing purpose. This machine is useful for medium and large volume production. Vacuuming, heating, drying and cooling functions are available in this mixer too.

This mixer has U-type shape chamber with sequence screw type mixing blade inside the chamber. Both chamber and blade are meet sanitary grade and GMP standard. Inside the chamber, because screw type blade creates double anti-flow, so it increases the material contact surface which makes the mixing fast and evenly. The bottom discharge part can connect to screw type discharge device for packing purpose. This machine is useful for medium and large volume production. Vacuuming, heating, drying and cooling functions are available in this mixer too.

It is the best rotary and rocking machine. It becomes the smart technology by modifying from the principles of V-type, U-type, diagonal-type and double cone mixers.

The principles of mixing is the tand body equipped with a simple blade to enhance mixing when it mixes. Instaneously, the thnk body will rock by left-right and up-down, to make the material move inside the tank body, to reach mixing quickly and fully.

This machine can incline to unload by manual button within 3¡ã5 minutes.

This machine is small-space occupation, silent and safe. And it is most available in the GMP food plant and pharmaceutical plant because the tank body is simple and easy to clean.